Browse our huge selection of Ampeg Replacement/Service Parts and more at FullCompass.com. Free Shipping on Thousands of Items! Ampeg B-15T Bass Amplifier Review Howdy! I have been a bass player and gear hound for years, so it is surprising that it took so long for an Ampeg amplifier to come into my life.

Click on photo for larger view Revisit™ VTL5C1 OPTO-ISOLATOR Replaces VTL5C1 from Vactec or Excelitas at an affordable price. Used in many Mesa-Boogie and Crate models in the channel switching circuit. 100dB dynamic range, fast response (2.5ms turn-on), very high dark resistance (50 M Ohm). Light resistance 200 Ohms at 20mA LED current. See datasheet.

Part # VTL5C1 $4.95 Click on photo for larger view 10-Conductor Ribbon Cable 3' Used to interconnect circuit boards in a variety of amps. • 3 inches long • 10 conductors set at 0.1 inch spacing - complete cable is 1 inch wide • Bare wire termination for soldering to PC board at 0.1' hole spacing - no connectors • May be easily cut with an X-Acto knife to make a cable of fewer than 10 conductors. • Not recommended for use in the Fender Hot Rod Deluxe / Deville or Blues Deluxe / Deville. The ribbon cables used in those amps have ribbon cables with conductors set at 0.156' spacing - this cable is too narrow for that application. Part #RJ-310 $0.99 Ampeg® & Crate Hardware Click on photo for larger view L-PAD FACE PLATE AND KNOB, for 3/8' diameter threaded bushing found on most L-Pad Level controls.

Face plate AND knob only! L-Pad ordered separately. Fits many bass cabinets including the SWR Goliath, Marcus Miller Golight 410, Workingman 8x10, Working Pro 2x10, Ampeg PN-210HLF, PN-410HLF, SVT-410HLF, SVT-610HLF, SVT-810SPC, BXT210M, BXT410HL4, PR-1528HE, PN-115HLF, PR-810H, PB-250, the Kustom G410H, the Engl B115 as well as many others. This is the face plate and knob only - L-PAD itself ordered separately. Raised lettering in charcoal gray instead of white. 3 1/8 inches in diameter, 7/8 inch depth into cabinet.

Requires 2 inch diameter hole for mounting. Screws not included. Part #LFP-380 $3.99 8 Ohms Click on photo for larger view L-PAD, 8 Ohms, 3/8' threaded bushing (3/8' long), with plate, knob and hardware. May also be used with the LFP-380 face plate and knob. 8 ohms - for use with 8 ohm speakers, horn drivers or tweeters. Cctv Software For Linux Mint. L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 3/8' shaft length, and comes with mounting hardware.

This style of L-Pad is found on many popular bass cabinets to control the horn/tweeter level. 2.5 inches in diameter, 1 inch thick. Included face plate is 2 1/8' x 2 1/8'. Part #LPD-262 $17.95 16 Ohms Click on photo for larger view L-PAD, 16 Ohms, 3/8' threaded bushing (3/8' long), with plate, knob and hardware. May also be used with the LFP-380 face plate and knob. 16 ohms - for use with 8 ohm speakers, horn drivers or tweeters.

L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 16 ohm loads, features a 3/8' shaft length, and comes with mounting hardware. This style of L-Pad is found on many popular bass cabinets to control the horn/tweeter level. 2.5 inches in diameter, 1 inch thick.

Included face plate is 2 1/8' x 2 1/8'. Part #LPD-261 $17.95 Click on photo for larger view Ampeg® 'a' Logo Used on modern Ampeg Products, this 3 inch x 4 inch plastic logo is affordably priced. Mounting screws included. Mounting centers are 2 ¼' x 2 ⅜'. Part #AL-921 $4.95 Click on photo for larger view Black Logo Mounting Screws Set of 4 logo mounting screws. These are #5 x 7/16' black oxide screws, set of 4.